Residential - Commercial - Industrial

Residential
Commercial
Industrial

Slimline Pharma

The Slimline Pharma door is designed for interior pharmaceutical environments, in cleanroom class 10,000 to 100,000, providing an aesthetically pleasing appearance, and simplified cleaning procedures for those applications demanding the finest in environmental control. The Slimline Pharma combines our proven control and drive system with our specially modified bead sealing technology, for ultra-smooth, ultra-quiet operation. Incorporating DYNACO’s exclusive DYNALOGIX II controls, with a variable frequency drive, provides maximum performance, flexibility and self-diagnostic capabilities which means helping to maintain an optimal pharmaceutical environment. The Slimline Pharma will operate with a difference in pressure of up to 0.82 lbs/sq.ft (winds of 10 MPH indicative, not including any multiplication coefficients, and taking into account the configuration of the building).

blanc 9010
White

bleu 5002
Blue

gris 7035
Grey

jaune 1003
Yellow

noir 9005
Black

orange 2004
Orange

rouge 3000
Red

vert 6005
Green

Standard Dimensions

12′ W x 12′ H

Opening Speed

48 in/s

Closing Speed

24 in/s

Door Operation

Gravity driven with flexible soft bottom edge.

Side Guide

Made of structural channels of 2 1/16″ x 1 1/2″ x 1/8″ in white powder coated steel. (Optional: Stainless steel)

Inner Side Guide

Polyethylene (PE-UHMW 1000); outer section 9/16” x 9/16”.

Covers

Side, drum and motor covers in white powder coated steel. (Optional: Stainless steel)

Drum

In steel, diameter 4″ x 0.078″, shafts in steel.

Door Curtain

Reinforced PVC (27 oz/sq.yd) and continuous sealing bead, with flexible weighted soft bottom edge design. Available in different colors.

Vision

One vision banner 15” x door width or individual windows 24” x 24” optional.

Motor

Standard 1 HP at 208V, 230V or 460V. Motor is VFD driven, Nema 4, 2 poles without brake.

Gearbox

Size 50 for a motor of 1 HP and gear reduction ratio 1/28.

Door Positioning

Absolute encoder mounted onto the back of the motor.

Detectors

An infrared photocell installed inside the side guide and detects the presence of a pedestrian or a vehicle. Upon activation, it opens the door immediately and keeps it open as long as the presence is detected. Height of photocell: 12″ from the floor. (Optional: Up to maximum 24″ from the floor).
A bottom edge detector reverses the door when it hits an obstacle during the closing cycle. This detector is positioned at the bottom part of the curtain.
The bottom edge is referred to as a WDD or Wireless DYNACO Detector: A wireless detection system consisting of a transmitter in the bottom bag of the door and a receiver in the control box. The system operates according to the “open loop” principle: when the sensor encounters an obstacle, the transmitter leaves the standby mode and sends a signal to the receiver that immediately opens the door.

Power Supply

Standard single phase 208-230 VAC, three phase 208-230 VAC, three phase 460 VAC.
Frequency: 50-60 Hz. Circuit breakers to be provided by the customer: 10-20 A for 1 HP

Space Requirements

All indicated dimensions are net: the additional space necessary for mounting and maintenance has to be taken into account. Reduced dimensions upon request.

  • Pharmaceutical
  • Hospitals
  • Laboratories
  • Controlled Environments

Downloads