Residential - Commercial - Industrial

Residential
Commercial
Industrial

G-5000 / G-5200 / G-5138


The ones that adapt to varied work environments

The Garaga G-5000, G-5200 and G-5138 are industrial garage doors pre-painted galvanized steel for industrial and commercial use that offers all the benefits of a standard garage door, PLUS a superior insulation factor higher and a system of ironwork which allows a flawless opening and closing of the door.

  • Steel
  • Thickness: 1 ¾”
  • 9 colors
  • Polyurethane sandwich door
  • R‑16 insulation
  • Model: Grooved

INSULATION OPTIONS

G-5138: R‑12, Thickness: 1 3⁄8″
G-5200: R‑18, Thickness: 2″

 

A) High-pressure injected polyurethane

  • Stronger and more energy-efficient insulation
  • Solidly bonded to the steel sheets providing a section that is resistant to flexion.

B) Sealed thermo-pane windows

  • Optimize insulation and reduce seal failures with galvanized steel spacer technology
  • Ensure a long lasting and refined appearance with one-piece molded polypropylene window frame.

C) InterlokTM triple-contact joints

  • Sections are strengthened by 2 steel walls joined together with mechanical interlocking joints which are more solid than just two bonded walls.
  • Mechanical thermal breaks which are more efficient compared to thermal breaks made with glue.
  • Triple-contact joints provide 2 times more weathertightness than those of the competition. Garaga Lab - Tested Logo

D) Metal reinforcement plates

  • Provide stronger fastening for hinges and struts. These 14-gauge plates are 2 times thicker than 20-gauge plates used by other manufacturers.

E) Wood end blocks

  • Provide a thermal break that is more effective than steel end caps which form a thermal bridge. Garaga Lab - Tested Logo
  • Structural elements of the sections, the kiln-dried pine wood end blocks are installed at the outer ends of the section. They are stronger than insulation covered with a steel cap.

F) Lag screw system

  • Provides much better fastening of the end hinges. The lag screws engage 8 threads into the wood, compared to a self-tapping screw going through a steel end cap engaging only about 2 or 3 threads.

1) Steel walls

  • 26/26-gauge, G60 hot-dipped galvanized steel with five coats of protective finish.
  • Baked-on polyester paint. Can be repainted.
  • Woodgrain finish on both sides of the door.
  • Same quality of corrosion-resistant steel for interior and exterior faces.

2) Insulated door with high-pressure injected polyurethane foam ensuring a high thermal-resistance rating and the solidity of a composite material.

  • G‑5000: 1 ¾” (44.5 mm), R‑16 (RSI 2.8 or k= 0.357 W/m2K)
  • G‑5138: 1 3⁄8″ (35 mm), R‑12 (RSI 2.1 or k= 0.476 W/m2K)
  • G‑5200: 2″ (50 mm), R‑18 (RSI 3.2 or k= 0.313 W/m2K)

3) InterLokTM joints between each section:

  • Mechanical joints ensure stronger sections with walls of each panel mechanically interlocked (not only bonded by the polyurethane).
  • Mechanical thermal break avoids heat transfer between the interior and exterior walls of each section.
  • Triple-contact joint prevents air infiltration.

4) U-shaped tubular bottom weatherstripping made of thermoplastic elastomer (TPE) ensures the weathertightness of the threshold. Remains flexible and watertight during cold weather, to -62°F (-52°C).


5) Wood end blocks made of kiln-dried pine (grade 4). With our lag screw system, ensure better fastening of the end hinges. They also provide a thermal break which prevents thermal bridging.


6) 14-gauge steel reinforcement plates placed inside the door for solidly attaching hinges and struts.


Door weight:

G-5000: 1.90 lb/ft2 (9.3 kg/m2)

G-5138: 1.75 lb/ft2 (8.5 kg/m2)

G-5200: 1.95 lb/ft2 (9.5 kg/m2)

MODEL

Grooved layout
Grooved


SIZES (G-5000 and G-5200)

Width – In 1″ (25 mm) increments : From 4′ to 29’6″ (1.2 m to 9 m)

Height – In 3″ (76 mm) increments : From 6′ to 24′ (1.8 m to 7.3 m)

 

SIZES (G-5138)

Width – In 1″ (25 mm) increments : From 4′ to 18’2″ (1.2 m to 5.5 m)

Height – In 3″ (76 mm) increments : From 6′ to 18′ (1.8 m to 5.5 m)

  • 10 years against any perforation of steel due to rust
  • 10 years on the wood and blocks against cracking and rot
  • 10 years against delamination of the steel skin from the polyurethane foam
  • 1 year on other door components
  • 10 years against seal defects on Standard windows

STANDARD


PREMIUM

Premium Colors: small additional fees apply.

The accuracy of colors on the website may vary depending on your screen settings. To see the true colors, please contact your local Garaga dealer for a sample.

STANDARD WINDOWS

G-5000 Standard windows

Available for doors: G-5000, G-5138, G-5200

Sizes: 21″ x 13″ (533 mm x 330 mm)

Glass

  • Thermopane windows: Clear, Satin, Wired, Tempered, Laminated or Tinted
  • Single glass (3 mm): Clear, Satin, Tempered or Tinted
  • Polycarbonate (3 mm): Single or Thermal (Sealed): Clear or Tinted

Frame colors: White, Desert Sand, Claystone, Dark Sand, Brown, Evergreen, Black and Charcoal.


OVAL WINDOWS

G-5000 Oval windows

Available for door: G-5000

Sizes: 26″ x 13″ (660 mm x 330 mm)

Glass

  • Polycarbonate only

Frame color: Black


G-4400 SECTIONS (FULL VISION)

G-4400 Sections (Full Vision)

Available for door: G-5000

All info about this product: See the G-4400 section

Glass

  • Single pane: Clear, Satin, Tempered, Laminated or Tinted
  • Sealed windows: Clear, Satin, Wired, Glue Chip, Low-e, Tempered, Laminated or Tinted
  • Fluted polycarbonate: Clear or Bronze
  • Single polycarbonate : Clear or Tinted
  • Sealed polycarbonate (thermal): Clear

Frame colors: White, Black and Anodized

STEEL TRACKS

  • 2” (50 mm), 13-gauge or 14-gauge
  • 3” (76 mm), 12-gauge

HARDWARE SYSTEMS AND OPTIONS

Learn more about:

Downloads