A) High-pressure injected polyurethane
- Stronger and more energy-efficient insulation
- Solidly bonded to the aluminum sheets providing a section that is resistant to flexion.
B) Aluminum
- Pre-painted (5 coats), 0.60 mm thick aluminum is ideal for large-sized doors. Being very lightweighthelps to extend the life of the components for doors with a large number of operation cycles.
C) InterlokTM triple-contact joints
- Sections are strengthened by 2 aluminum walls joined together with mechanical interlocking joints which are more solid than just two bonded walls.
- Their mechanical thermal breaks are more efficient compared to thermal breaks made with glue.
- Triple-contact joints provide 2 times more weathertightness than those of the competition.
D) Metal reinforcement plates
- Provide stronger fastening for hinges and struts. These 14‑gauge plates are 2 times thicker than 20‑gauge plates used by other manufacturers.
E) Wood end blocks
- Provide a thermal break that is more effective than steel end caps which form a thermal bridge.
- As structural elements of the sections, the kiln-dried pine wood end blocks are installed at the outer ends of the section. They are stronger than insulation covered with a steel cap.
F) Lag screw system
- Provides much better fastening of the end hinges. The lag screws engage 8 threads into the wood, compared to a self-tapping screw going through a steel end cap engaging only about 2 or 3 threads.
1) Aluminum walls
- Thickness of 0.023” (0.60 mm).
- Pre-painted aluminum with five coats of protective finish. Baked-on polyester paint. Can be repainted and is corrosion-resistant.
- Woodgrain finish on both sides of the door.
2) 1 ¾” (44.5 mm) insulated door with high-pressure injected polyurethane foam ensuring a high thermal-resistance rating of R-16 (RSI 2.8 or k=0.357 W/m2K) and the solidity of a composite material.
3) InterLokTM joints between each section:
- Mechanical joints ensure stronger sections with walls of each panel mechanically interlocked (not only bonded by the polyurethane).
- Mechanical thermal break avoids heat transfer between the interior and exterior walls of each section.
- Triple-contact joint prevents air infiltration.
4) U-shaped tubular bottom weatherstripping made of thermoplastic elastomer (TPE) ensures the weather tightness of the threshold. Remains flexible and watertight during cold weather, to -62°F (-52°C).
5) Flexible top weatherstripping 2 ½” (64 mm) and aluminum extrusion for aluminum doors of 10’ (3048 mm) wide and over.
6) Wood end blocks made of kiln-dried pine (grade 4). With our lag screw system, ensure better fastening of the end hinges. They also provide a thermal break which prevents thermal bridging.
7) 14-gauge steel reinforcement plates placed inside the door for solidly attaching hinges and struts.
Door weight: 1.55 lb/ft2 (7.6 kg/m2)
MODELS
4 Grooves 2 Grooves
SIZES
Widths – In 1 ” (25 mm) increments : From 4′ to 29’6″ (1.2 m to 9 m)
Heights – In 3″ (76 mm) increments : From 6′ to 24′ (1.8 m to 7.3 m)
- 10 years against any perforation of aluminum due to rust
- 10 years on the wood end blocks against cracking and rot
- 10 years against delamination of the steel skin from the polyurethane foam
- 1 year on other door components
- 10 years against seal defects on Standard windows
The accuracy of colors on the website may vary depending on your screen settings. To see the true colors, please contact your local Garaga dealer for a sample.
STANDARD WINDOWS
Sizes: 21″ x 13″ (533 mm x 330 mm)
Glass
- Thermopane windows: Clear, Satin, Wired, Tempered, Laminated or Tinted
- Single glass (3 mm): Clear, Satin, Tempered or Tinted
- Polycarbonate (3 mm): Single or Thermal (Sealed): Clear or Tinted
Frame colors: White, Brown, Claystone, Desert Sand, Black and Dark Sand.
OVAL WINDOWS
Sizes: 26″ x 13″ (660 mm x 330 mm)
Glass
- Polycarbonate only
Frame color: Black
G-4400 SECTIONS (FULL VISION)
All info about this product: See the G-4400 section
Glass
- Single pane: Clear, Satin, Tempered, Laminated or Tinted
- Sealed windows: Clear, Satin, Wired, Glue Chip, Low-e, Tempered, Laminated or Tinted
- Fluted polycarbonate: Clear or Bronze
- Single polycarbonate : Clear or Tinted
- Sealed polycarbonate (thermal): Clear
Frame colors: White, Black and Anodized
STEEL TRACKS
- 2” (50 mm), 13-gauge or 14-gauge
- 3” (76 mm), 12-gauge
HARDWARE SYSTEMS AND OPTIONS
Learn more about: